*** This firmware update is for RECONYX HyperFire Cameras with Cellular Upgrade ONLY.***
NOTE: ALL other HyperFire Models should use the standard HyperFire version (above).

If you want to be sure you have the correct firmware with all the latest features and performance enhancements, you should load this firmware onto your Cellular HyperFire cameras.

To determine if this firmware update is appropriate for you...

Be sure your camera has the Cellular Upgrade installed. Go to the "Camera Info" option on your camera and see which version of firmware is currently loaded on your camera. The top line of the Camera Info display will look something like this: V:3.0.1.20100409. The last 8 digits of the first line are the release date of the firmware.

Follow these steps to update your Cellular Enabled camera:

Click the appropriate link below to save the update file to your computer:

AT&T 4G firmware file (Recnxsd2.bin V: 4.2.1.20210818)
AT&T 3G firmware file (Recnxsd2.bin V: 4.2.1.20161229)
Rogers firmware file (MMS) (Recnxsd2.bin V: 4.2.3.20161229)
Rogers firmware file (Data) (Recnxsd2.bin V: 4.2.3.20210818)
T-Mobile firmware file (Recnxsd2.bin V: 4.2.2.20161229)
Verizon firmware file (Recnxsd2.bin V: 4.2.4.20210818)
More Carriers

Locate the file on your computer and copy it to a blank SD card.
With the camera turned OFF... Insert the SD card into your camera.
Turn the camera ON and it will automatically update itself.
While updating, the camera will flash the walktest LED rapidly and display "UPDATING" on the LCD panel for a few seconds. After updating, the camera will delete the file and boot like normal.
Repeat Steps 2-4 for each camera you need to update.

Along with the new Firmware is a new HyperFire Instruction Manual, download an electronic copy now.

Firmware Updates